-
### Hardware
ESP32-S3
### Firmware version
v2.4.6
### Application version
v2.4.6
### What happened? What did you expect to happen?
Configured espsomfy to use with another wifi network.
Left i…
-
No target/alias for Jumper T-Pro S
https://www.jumper-b2b.com/jumper-t-pro-internal-24g-1000mw-expresslrs-elrs-module-radio-controller-hall-sensor-gimbals-edgetx-opentx-p0114.html
-
WiFi not there for the LiveUSB from PXEBoot
@hardware-support
May need to update kickstart
Nice place to see how things are made: https://pagure.io/fedora-kickstarts
iwlax2xx-firmware
…
-
### Category
Other
### Hardware
T-Beam S3
### Firmware Version
2.5.7
### Description
Hello,
I have 2 Lilygo Supreme devices. When I configure WiFi and enable MQTT, the devices randomly reboots…
-
Hello
I don't know if the last version of Esphome break all my conf of this Athom Relay 4CH but this relay seems boot and after each action on switch it reboot, disappear from Home Assistant, .....…
-
## Motivations
Wifi on esp32c6 requires an `Rng` instance. TLS requires a `Trng` instance. But both `Rng` and `Trng` consume the `RNG` peripheral. Since `Rng` can be cloned, `Trng` should have anot…
-
With a long Wifi password the connection cannot be established, what length is acceptable ? There is no source code, so debug is not possible.
-
If i want to connect a libremesh node to the Internet via wifi, for example because my hardware has no wan port, i use luci, and when luci creates a wifi client, it name default is wwan. But watching …
-
Hi,
I am trying to send data to a hardware device which is connected via Wifi.
I have device's ip address and port number and used following code to send.
But it always shows 'Connection Error …
-
**Have You Read Our Docs**
Yes
**Are You Reporting A Bug**
Yes
**Environment**
- Kext Version: AirportItlwm.kext [2.3.0 sonoma 14.4+]
- WiFi Card Model: Ice Lake-LP PCH CNVi WiFi
- PCI Pr…