-
Firstly, Thanks Ostaquet for your work on this library, it's the only one out there! But I have an issue.
Just put my winsen mq131 low concentration sensor in front of an ozone generator, was sitti…
-
### Description
German native speaker here. I didn't like the names, that were automatically created. They sounded unnatural and uncommon and several were plainnly wrong. So I created a big new names…
-
## Mycodo Issue Report:
- Specific Mycodo Version: Current sensor implementation in mh_z19.py
#### Problem Description
The MH-Z19B sensor is shipped with automatic baseline correction e…
-
When compiling for adding support for MHZ19 to the board NodeMCU Lolin, I get this error:
In file included from sketch/config/sensors.h:757:0,
from sketch/config/all.h:33,
…
-
Allow a new input to be added to Mycodo with a single file.
This issue is to track the progress of this potential feature. A new branch will be created for this, [single_file_input_modules](https:/…
-
Hello
Updated from 5.7.3 to 6.0.x
Now my Am2315 is not working.
Wired directly to Raspi 3 without any Multiplexer. scl and sda 0
I2c detect shows no device.
How to add multiple Sensors with stati…
-
Originally reported by: **laurinaitis (Bitbucket: [laurinaitis](https://bitbucket.org/laurinaitis), GitHub: [laurinaitis](https://github.com/laurinaitis))**
----------------------------------------
…
-
Have added a MH-Z19 to a RP3B and added enable_uart=1 to /boot/config.txt but still cannot get data from it. Pins (MH RP3) are 2 (RXD) to 8 (TXD), 3 (TXD) to 10 (RXD), 7 (GND) to , 6 (VIN) to 3 (5V).…
-
The latest releases of Mycodo has a new category, Functions, with PID Controllers placed as a type of Function.
I'd like to get some input from the community as to what type of functions you think …
-
## Mycodo Issue Report:
- Specific Mycodo Version: 5.5.0
#### Problem Description
MH-Z16 uart sensor command string contains unicode characters making the sensor framework fail.
### Erro…