-
Pycom modules used: LoPy4 and WiPy3
Firmware Version: Latest Legacy (I think it is legacy v1.20.0.rc13)
I don't have the device with me so I cannot check.
* Exact steps to cause this issue
…
-
Hi,
I've managed to setup the advertisement as such now it functions as an iBeacon. However, I can't find anywhere in the documentation for a way to set the advertising frequency and the actual tra…
-
Hello guys
I have a LoPy4 v1.20.2.rc6 with Expansion board expansion31_0.0.11
Tried to load the example project "lorawan-nano-gateway"
After couple of hours (between 1 and 8) the LoPy crashes w…
-
Tried using your library on a WeMos D1 mini running MicroPython v1.8.138
Almost works. Calls to `self.write_cmd()` are failing as it requires a buffer.
```
>>> import st7735
>>> import tft
>>> from m…
-
This error occurred on a Pycom Wipy
code I used:
```python
import time
from scd30 import SCD30
from machine import I2C
#I2C setup
print("setup i2c")
i2c = I2C(0, I2C.MASTER, baudrate=50000…
-
Hi, a very simple test script running under python3.7 runs perfectly in PyRIC, gets lots of errors in your fork. This is the test code:
```
try:
card = pyw.getcard(i)
print("Card …
fnoop updated
3 years ago
-
Please include the following information when submitting a bug report:
* The Pycom board you are using (e.g. WiPy 2.0, LoPy).
* G01
* The firmware version you are using. You can get it by execut…
-
When trying to use the Ctrl-E paste mode, lost the focus, did a reset on the board.
```
Warning:
An unhandled exception occurred. Please report the problem
using the error reporting dialog or vi…
-
While trying urequests and umqtt.simple modules over SSL socket I had to modify socket constructor within these modules:
from:
`socket.socket()`
to:
`socket.socket(socket.AF_INET, socket.SOCK_STREAM, …
-
According to the doc:
Set a timeout on blocking socket operations. The value argument can be a nonnegative floating point number expressing seconds, or None. If a non-zero value is given, subsequent s…