-
Using the default example...
```go
// Connects to an WS2812 RGB LED strip with 10 LEDS.
//
// See either the others.go or digispark.go files in this directory
// for the neopixels pin assignmen…
-
**Describe the bug**
Colors are not what they should on Raspberry Pi 4.
It seems Raspberry Pi 4 (more?) introduce a one (1.5?) cycle delay between bytes. This mess up the timing of BitmapNeo3 fo…
maloo updated
8 months ago
-
Hello,
I have setup mentioned above, and after around 10 mins of usage, I have constant flashing same as on video below
https://www.youtube.com/watch?v=xHdZHHp_NBI&ab_channel=PetrLuke%C5%A1
I t…
-
After connecting to Dc5v its only lighted up the first led bulb and it was green and others were not. Why is that. Does it need a controller or something to work the whole strip
-
добавьте подсветку лестницы на ws2812b и сенсорах
-
Hi. After some minutes, prismatik stops working and leds freeze. For restart them, I have to restart the pc. I use an arduino nano, 50 ws2812b and a dedicated psu for the lights. How can I solve? Than…
-
第一个问题是说找不到json文件，原来你把ws2812b路径写成了rt_ws2812b
第二个问题是，你没有打开DMA
第三个问题是，没有开对应的SPI，我也不知道怎么开，然后运行你的例子，首先就find不到设备，因为你没有挂载设备，怎么能find到设备呢？我是新手。find后面的create里面是挂载了，也提示出错，能检查一下吗？谢谢了。非常感谢你的包。
-
Hi. Thanks for the library. It works very well, accurate and looks pretty good.
But when I want to set WS2812B_NUMBER_OF_LEDS is over than 100 it looks signal is disrupted.
Is there a solution …
-
Hi,
i am searching for some help customizing the "FAST LED - Webserver". I built a boardgaming table with WS2812B integrated in the frame. Now I want to seperate
the WS2812B into 6 Parts (for 6 Pl…
-