-
Thanks for the v1.1 .uf2, I tried it today.
I have connected a GPS but see no frequency correction.
SETFREQ 10000000
Frequency (measured) stays at 10 000 014.3 (error of 1.4 ppm)
Slightly se…
-
在 TeX Live 2021 下,使用 XeLaTeX 编译下面的代码:
```TeX
\documentclass{article}
\usepackage[AutoFakeBold=true]{xeCJK}
\usepackage[fontset=ubuntu]{ctex}
\usepackage{zhlipsum}
\begin{document}
\songti…
-
@wspr, I wonder whether `opbd` could be implemented in fontspec.
the OpenType feature “optical bounds” has been implemented recently in ConTeXt.
Here you have a sample that shows the feature:
…
ousia updated
7 years ago
-
Check why 70 cm is not yet decoded.
F5OEO updated
5 years ago
-
I try to compile your whisper code on RPI. It is a brand new lite image.
I did
sudo apt-get update
sudo apt-get upgrade
sudo apt-get install git
git clone https://github.com/JamesP6000/Wspr…
mucsb updated
2 years ago
-
I don't think this is a duplicate, if it is please delete it.
The current rig control is great if you want to have a second radio slaved to CubicSDR. Adding support for CubicSDR to act as a controll…
-
It would be very helpfull if we could switch gpio's when transmitting so we could switch different outputs for different low pass filters !
the gpio must be part of the command line:
example:
…
-
We did some troubleshooting after trying to run WsprryPi on a Raspberry Pi 4.
Two issues:
1. makefile does not correctly identify the Pi version
Both the Pi3B and Pi4 identified the same ARMV7l
…
-
I'm trying to use MdSymbol with Fira Math (loaded using unicode-math) to fill in the missing glyphs. Most of it seems to be working fine, but the `\sim` symbols are missing, even though it is listed i…
-
Hi,
today i installed the brand new raspbian buster and i could not install WsprryPi becaus e make ends with the error message: **undefined reference to 'makedev'**
Thank you