-
Hi littleboot,
thank you for sharing your ACRE project, it's very interesting.
I have some questions:
- Having 16 transmitting electrodes, aka 16 SPWM signals, will it improve the resolution?
…
-
I’m on St32f072c8t.
I can use only one of these 2 pin to control a ws2812 led strip:
PA14 (Alternate functions Usart2_tx and swclk)
or PA12 (Alternate functions can_tx, usart_rts, tim1_etr, comp2_…
-
### CircuitPython version
```python
Adafruit CircuitPython 6.1.0 on 2021-01-21; Adafruit QT Py M0 with samd21e18 also
Adafruit CircuitPython 7.0.0-beta.0-161-g65753a1c2 on 2021-09-01; with samd51j19…
-
### Background Work
- [X] Yes, I searched the [mailing list](https://groups.google.com/forum/#!forum/chipyard)
- [X] Yes, I searched [prior issues](https://github.com/ucb-bar/chipyard/issues)
- […
-
When trying build for the pi, the build fails with this output:
`make ARCH=arm CROSS_COMPILE= -C /lib/modules/3.13.0-24-generic/build M=/home`
`/path/to/rtl8812au modules`
`make[1]: Entering direc…
-
Like many on here I am having issues receiving. Being old hat with RFcat and having made quite the personal toolset (still need to publish the rest) I was looking for a cheaper alternative that I coul…
-
As suggested in https://github.com/whitequark/Glasgow/issues/67#issuecomment-429797935.
-
This is incredible ! Well done bitfixer !!
Could you please include this with an arduino example , as it much easier for noobs ( like me ) to experiment with...
Thanks in advance !
-
Hi,
I tried to load and run Bootrom, BBL and Linux Kernel on FPGA.
Bootrom and BBL can print on UART console without any issue, but the Linux Kernel cannot, even it went pass through a few place…
-
### Describe the bug
While dropping Throttle to Zero my quadcopter continues to ascend. Blackbox logs show that Motors 3 and 2 are start at 45% while 4 and 1 are at 0% while Airmode attempts to hold…