-
```
What steps will reproduce the problem?
1. dump eeprom file with iwleeprom
2. modify the regdomain in the dump from 64 to 37 with an hex editor
3. correct crc of the dump using iwleeprom internal c…
-
```
What steps will reproduce the problem?
1. dump eeprom file with iwleeprom
2. modify the regdomain in the dump from 64 to 37 with an hex editor
3. correct crc of the dump using iwleeprom internal c…
-
Advanced ESP device settings:
- [ ] interval mellem readings for temp/humidity
- [ ] interval mellem readings for particles
(når en sensor er tændt kan vi ligeså godt få begge readings)
- [ ] Updat…
-
```warning: 'EEPROM' defined but not used [-Wunused-variable]```
This warning occurs because EEPROM.h declares the EEPROM variable as follows:
```static EEPROMClass EEPROM;```
This means that…
-
Whenever any new settings (such as new PID settings, Z offset, etc.) are saved they are lost after powering off the printer.
-
newer raspi-config versions integrate with the https://github.com/raspberrypi/rpi-eeprom tool, but this script doesn't install them.
-
I'm getting an intermittent exception when creating a base station, node, and sync sampling network. The exception can be hard to reproduce, as it only happens sometimes. It usually occurs when callin…
-
> grbl/eeprom.c: In function 'memcpy_to_eeprom_with_checksum': grbl/eeprom.c:133:26: warning: '
-
```
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Please provide any a…
-
board_id(){
EEPROM_DEVICE=/sys/bus/i2c/devices/0-0050/eeprom
board_id=`dd bs=12 skip=7 count=1 if=$EEPROM_DEVICE 2>/dev/null`
}