-
Arduino: 1.8.5 (Mac OS X), Board: "WeMos D1 R2 & mini, 80 MHz, 921600, 4M (3M SPIFFS)"
Sketch wird kompiliert...
In file included from /Users/marlisdrechsler/Documents/Arduino/ESP-sc-gway/ESP-sc…
-
I'm using OMG on a Wemos D1 and it seems to work. It connects to WiFi, it connects to the MQTT broker running on HA, and I pick up the RF signals from a Kerui D026 sensor. I have a few ESPURNA devices…
-
### Basic Infos
#### Hardware
Hardware: Wemos D1 mini (ESP-12F, CH340G USBSerial, 4M bytes flash)
Core Version: ?
### Description
I've been having lots of issues trying to reflash a …
-
I'm trying to compile the wsp8266_webinterface but I get this error messages:
Arduino: 1.9.0-beta (Linux), Board: "LOLIN(WEMOS) D1 R2 & mini, 80 MHz, Flash, Enabled, 4M (no SPIFFS), v2 Lower Memory…
-
I have buggy firmware that enters wdt reset loop at some time. Once it enters the loop, there is no way to flash anything on this chip using esptool.py, operation ends with `A fatal error occurred: Ti…
zgoda updated
5 years ago
-
Hello,
I have problems getting the readings to my SDM120C Modbus meter running. I don´t know, if this is a bug or if I am lacking information, or if my setup is wrong.
I tried to fill out the ch…
D-t-M updated
5 years ago
-
Attempting to compile gives this error message:
```
Arduino: 1.8.8 (Windows Store 1.8.19.0) (Windows 10), Board: "LOLIN(WEMOS) D1 R2 & mini, 80 MHz, Flash, Enabled, 4M (no SPIFFS), v2 Lower Memory…
-
Hi, I hope you'll can help me. I'm working now with MH ET Live mini and some Wemos D1 mini' shields. I don't know about electronics and currently I'm learning to use these amazing devices.
In my pr…
-
I have had McLighting working great with a couple of ESP8266-01 modules. I have 3 new Wemos D1 Mini's and figured it would be a pretty easy switch over.
Unfortunately, I can install the software, …
-
Hi,
I have ESP32-Nodemcu Lolin v3 board and RFM95 module. I chose the _PIN_OUT==3 connected the same pins for Wemos here in nodemcu, but it does not work.
I get this error:
> Unknown transcei…