-
Hi
So I built a second unit and everything seems fine. I measured the voltages, following Colin's Youtube video:
The test header (J3) shows around 228V. When I press the PULSE button, the voltage go…
-
-
**Describe the bug**
When using the MPU6050 sensor, if the sensor is connected to a stack of a Feather M0 (Wifi or LoRa version) and a Hypnos (version 3.3), then the measurements taken by the MPU6050…
-
Hi @mrtoy-me,
But after the update vl53l1x I get an incorrect result.
It gives me 67,000mm instead of 670mm
Could it be my fault or some bad configuration?
Thanks for your work.
-
CPU% of xfce4-power-manager spikes to 10-100% according to `top`. According to `strace` it is reading the battery status a few thousand times a second. This problem is exacerbated by suspending, but w…
-
On egzumer 0.22 tx sensitivity on UHF -119db, but on stock was 126-127db. Would be nice if in the next relises sensitivity come back to stock firmware results
-
We have a list of solvers here
https://www.cvxpy.org/tutorial/advanced/index.html#choosing-a-solver
But there's no guidance on how to choose among them.
Facts off the top of my head:
* ECOS …
-
Running `gdrcopy_pplat` fails with `Assertion "(cuStreamQuery(0)) == (CUDA_ERROR_NOT_READY)" failed at pplat.cu:257`.
See complete logs below
Click me
```Bash
GPU id:0; name: Tesla V10…
-
Hi,
First of all, thank you for all of the hard work you've put into the NMEA2000 library!
I'm having issues with your due_can fork: https://github.com/ttlappalainen/due_can/ not working on my …
-
# Case Study Template
## Overview
* The eShop Web application is a web application built on Asp.Net .It is built with monolithic architecture and follows MVC Design pattern
* The application …