-
Have serial bridge setup per instructions on pizero 2w. Everything on that ends seems ok. But the mosaic doesnt connect. I have tried putting in the actually address (/dev/ttyGS0) but nothing seems to…
-
Unfortunately I had to reinstall Klipper today. After updating everything and installing all the components I used before installing, I ran into problems with LED Effects:
```
Unhandled exception …
-
Hi,
when I connect an adxl345 sensor as described the screen turns white at the moment the Makerbase logo should show up.
I double checked wiring. **The adxl345 runs fine on a bluepill connected v…
-
Hi All.
I am running happy hare on a tradrack and have noticed the following.
If using any other gate than gate 0, I need to set the gate 0 as the same filament as the gate i am using, the slicer is…
-
Moonraker telegram bot, which were installed normally in version 1.0.4, experienc…
-
### What happened
Hi, I've set up klippy, moonrake and mainsail (latest git versions)
Service parameters:
```
/usr/lib/python-exec/python3.10/python /home/klipper/klippy/klippy.py /var/lib/kli…
-
**Describe the bug**
After updating spoolman and Happy Hare I'm getting "Unparsed config option 'update_spoolman_location: True' detected in section [mmu_server]." from moonraker whenever I restart k…
-
I followed this guide for the installation, but the mainsail.cfg file is missing after the installation is complete.
I didn't notice anything unusual in the log files.
-
GigabotX - UT -- Motion --- 5/17/2023 13:38:30
Mainsail Version: 2.3.0-beta1
Moonraker Version: 0.7.1-486-g9b5b3cc
Klipper Version: 0.10.0-297-gdeeb1af3
Issue Condition: Command Sent
Issue Details:…
-
Gigabot XLT - GB4 #969 -- Error Message --- 4/28/2023 8:54:11
Mainsail Version: v2.3.0-beta1
Moonraker Version: v0.7.1-453-gee312ee
Klipper Version: v0.10.0-297-gdeeb1af3
Issue Condition: Command Se…