-
**Context:** I've been working on [reimplementing Redox's network stack with smoltcp](https://github.com/batonius/netstack/tree/smolnetd/src/smolnetd), and [it looks good so far](https://user-images.g…
-
Dear Sir
i'm using 6lbr and sky and it works fine
i would like to use the contiki websense in the ipv6 example dir
6lbr does see the node but i doesen't connect to the route
i did add
# define NETS…
-
With a GPL license on an SDK, any application using the SDK must also have its source released under the GPL.
Please consider an MIT or BSD license for the SDK -- to allow zerotier to be used by bu…
-
Hello everyone,
As the title says, there is a way to pause or stop RPL? Im on a project that because of hardware limitations, can't use the radio and manage a device via UART at the same time. Tryin…
-
Hi,
I have been working for some time now with 6lbr. My setup is basically a RPI2 which acts as a border router and in which 6lbr is deployed. The RPI2 has connected to one of its USB ports a CC265…
-
Attempting the test on my system results in a "Error: IOCTL_MEI_CONNECT_CLIENT receive message. err=-1" instead of any results. I am using Arch Linux 64-bit, with kernel 4.10.13 (stock version from th…
-
About week ago I succeed with building my first 6lowPAN sensor network. The setup is following: 6lbr, running under Ubuntu VM with cc1310 slip-radio connected to it. Output from slip-radio is followin…
-
I pull the latest 6lbr and build it for CC2538DK+enc28j60. I can access to 6lbr web page but my CC2650 SensorTag cannot join 6lbr running on CC2538DK+enc28j60. I have see 6lbr uses channel 25 and pan …
-
I am using latest build of contiki.
I have just added the following lines [here][3].
#define SICLOWPAN_CONF_FRAG 1
#define UIP_CONF_BROADCAST 1
#define UIP_CONF_REASSEMBLY 1
…
-
Hi all,
I am trying to get the RSSI value from the CC2538.
When run the following code into the receiving function I get
**RSSI: -104 dBm [0xff98]** sometimes **RSSI: -105 dBm [0xff97]**
which doe…