-
Describe the bug
I tried to send RF data via an ESP32. Unfortunately, although the code is recognized correctly and also output via the console, no receiver receives a signal. Receiving signals with …
-
-
Espurna 1.13.5
rc2.5.0 and rc2.4.2
When i want to change "Always OFF" to "Same as before" it doesnt save and restarts...
So my switches turns off everytime SRFB restarts.
-
I always get the first ir code i pushed {"value":4294967295,"protocol":3,"bits":0,"raw":"9072,2178,642"}
but real NEW code is not the same with short version above
{"value":14635183,"protocol":3,…
-
Hi,
I have successfully flashed the D12 mini with the OpenMQTTGateway V0.9beta, however my mqtt server ip address in incorrect. the unit does not seem to drop back into ap mode to allow me to corr…
-
I am trying to flash opengatewaymqtt v0.8 to nodemcu v3 (esp-12n) and getting following error. What I am doing wrong ? Simple sketch is working fine (serial printing or LED blink).
See my setup:
…
salvq updated
5 years ago
-
It would be nice if each device published information about its capabilities, and the topics for each, so that clients can automate discovery; for example, home-assistant could have a simple option in…
-
trying to flash OpenMQTTGateway.ino to my ESP8266 I get the following error:
/Users/a0000/Downloads/OpenMQTTGateway/ZmqttDiscovery.ino: In function 'void pubMqttDiscovery()':
ZmqttDiscovery:42:19:…
-
Im trying to move away from my homemade Arduino + RF to some commercial hardware and why reinvent the wheel when there are great projects like this and Tasmota. So bought a Sonoff RF Bridge before pow…
-
Love you project. I'm a newbie.
I have a nodemcu with a ir sender connected on D2 and ir receiver on d5. I've flashed my node mcu with a mix of IRMQTTServer and IRrecvDumpV2.
What I'm trying to do…