-
Hi I test this code
```
session = Session(hostname='x.x.x.x', community='PTSsnmpCacti', version=2, retries=3, timeout=40)
#for use change dslam port admin status:
session.set('1.3.6.1.2.1.2.2.1.7.10…
-
Hello Andras,
I have an Issue with an R820T2 Stick.
It runs fine under SDR# etc. but doesn't start up under OpenwebRX.
Is there any way to get it running ? I can't find any Failure.
`[openwe…
-
Test software on Ubuntu/Beaglebone to see if it works.
* Background notes: https://wiki.openag.media.mit.edu/contributors/replacing_arduino_and_raspberry_pi?s[]=beaglebone#beaglebone.
* Status: ex…
-
Hi,
as reported here: https://github.com/jpmeijers/ttn-resin-gateway-rpi/issues/10, i can not build a alpine docker image in case of qsort_r is not implemented in Alpine Linux. It seems that is the l…
-
The installation appeared to go successfully (on a fully updated version of Weezy), but when I reboot I get the following messages:
Listening on LPF/eth0/b8:27:eb:82:ea:1d
Sending on LPF/eth0/b8:27:e…
-
Could someone explain what this means?
![image](https://cloud.githubusercontent.com/assets/14341365/12873498/3da99628-cd8c-11e5-8e5c-ace35ed7fbb8.jpeg)
Also, on one of Chris's videos he says that we…
-
Hallo,
ich finde dein Projekt sehr interessant und habe soeben versucht, es auf einem frisch installierten Raspbian Stretch Lite vom 16.8.17 zu installieren. Dabei gibt es einige Probleme. Erst wird …
-
Hi, I bought a Pi-Lite today and installed Arrow, however, on running PiLiteWeather I get the following error:-
Traceback (most recent call last):
File "/home/pi/git/PiLite/Python_Examples/PiLiteW…
-
The goal of the system in configuration where it boots, takes an image with the camera and goes to sleep to achieve that in minimal time of about 8s.
Average power consumption 200mA, 8s duration is…
-
Hello and kudos on a very nice project.
The case I've got in mind is analogous to the 'Exe project file' option in VS. Is it possible to point VS at a Linux executable for example and then set up the…