-
Hello! I'm relative new to Xilinx FPGAs and ordered one of these boards. I'm wondering what is the best way to actually do some FPGA development on this board? I think I can put the bitstream file to …
-
Hi I was wondering what happens when / if the Raspberry Pi should halt due to over heating of the CPU, will the pi juice try to restart the Pi because of the watchdog or does the pi juice know that th…
-
Hi @cho45 , this looks very useful and I can see an embedded system in the making with a Raspberri Pi and Arduino or something similar. Whilst not expert with these devices I generally manage to bluff…
-
**Describe the bug**
Network connectivity drops out at random on CM3 with a custom carrier board with LAN9512. Device becomes completely unreachable over any network going through that chip (e.g. Eth…
-
### Describe the bug
As detailed by @lgeitner in the thread starting at https://github.com/raspberrypi/linux/pull/6144#issuecomment-2349489287, the MeteoPi application which requires UART access seem…
-
Board: BPI M2 Zero.
I'm trying to setup bluetooth.
The same command worked fine with 4.20.17
`brcm_patchram_plus -d --patchram /lib/firmware/ap6212/bcm43438a1.hcd --enable_hci --bd_addr b8:27:e…
-
I've recently deployed 12 units and have begun to notice some odd behaviour.
The units are given a schedule to wake and shut down in order to capture images at certain times. The unit relies on the…
Q-ten updated
5 months ago
-
Matron: The GUI interface running on the rpi4
Maiden: Their web-backend to send stuff to Matron
Overview Norns, Fates, Orca, Supercollider:
https://github.com/p3r7/awesome-monome-norns/blob/main/…
-
# **Issue №2883 opened by *[salem-ok](https://github.com/salem-ok)* at 2021-12-04 11:18:05**
**Environment:**
You can get some of this info from the text that pops up in the console when you…
-
I built the ft232 module and enabled `ft232h_usb_spi` in `start.py`, but dmesg doesn't say anything besides `Succeed to register spi driver(nrc80211).` .
I suspected a mismatch between the FT232H w…