-
### Checklist
- [X ] The title of this issue is "to the point" and descriptive.
- [ X] This issue describes what is happening.
- [ X] This issue describes what components are affected (e.g. name of…
-
Hi guys,
Please find attached a copy of the dump file
[dump_1921681115.bin.zip](https://github.com/user-attachments/files/17216211/dump_1921681115.bin.zip)
ump from the cloud cutter android appl…
-
Dear comrades, help with the equipment is required.
The wires were soldered to the board to the rx-tx connectors
ground is also connected to USB-TTL
power is used externally, and soldered to the …
-
I have a Buderus MC10 with RC310 Controller.
The MC10 is installed in an Buderus S315T low-temperature boiler.
For low-temperature boilers, there is a setting available to define a minimum switch-on…
-
When VenusOS started using FlashMQ, it seemed like a good idea to transfer all MQTT related communication to VenusOS given that FlashMQ is supposed to a high-performance MQTT broker (and you ideally w…
-
### PROBLEM DESCRIPTION
New energy meters for HM200 (Device 0x53) are missing, see #1463
I have a HM200 with Condens 7400iF heatpump and gas boiler.
### REQUESTED INFORMATION
_Make sure yo…
-
How do we change the sensor names? For example how to change garage-sensor-1 to garage-fermentation.
-
Hi, I bought a similar round sensor: **TH03Z**
The sensor uses a ZTU module and a 2450 battery.
Ali: https://aliexpress.ru/item/1005005942067380.html
I think the sensor is being used: **[GXHT30](…
-
Following a thread opened in forum https://www.letscontrolit.com/forum/viewtopic.php?p=25237#p25036, I was suggested to repost it here ;)
More and more automation systems are able to use the auto-d…
-
Hello Thanks for the release
My device still not recognize by amazon echo.
i try :
> delete all on amazon side
> delete all device on ha-bridge side
> change upnp send delay
> renumber dev…