-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Hi, can you please add support for the waveshare mini.
URL: https://www.waveshare.com/esp32-s3-zero.htm
Thanks
-
I think it'd be good if the PSX port would be replaced with a standard USB port or few. Not only USB is much more common than PSX and therefore the part would be cheaper, but also it's easy to find a …
-
Followed the guide for editing Marlin 2.0 for the SKR mini E3 V1.2, but when I try and hit CTRL+ALT+B I get STM32F103RC_bigtree FAILED.
Not sure if this matters but noticed when pasting in
` #def…
-
Hello I wanted to see if you'd be interested in adding a couple alternate schematic images? I edited yours to show an Arduino Uno in place of the nano and also both using a single voltage divider on …
-
Hello, I have a 5 inch capacitive HDMI touch screen bought on eBay that is connected to a Raspberry Pi 4 of the first series.
The problem is that after rebooting the RPI (sudo reboot -h), the scre…
-
**Pre-report checks**
- [x] Have you checked (use search) [Azure DevOps Board](https://ligstd.visualstudio.com/Apple%20PTP%20Trackpad/_workitems/recentlyupdated) and Github issues for known bugs an…
-
My printer is based on the MKS Robin Nano version used by Lotmaxx (they have their own silk screen on the PCB but I think it's v1.1 of the board and has a 3.5" TFT over FSMC).
The firmware uploaded…
-
{"format":"img","language":"es_ES","model":"DS3622xs+","version":"7.2.1-69057-1","addons":"acpid,mountloader,powersched,reboottoloader,photosfacepatch,codecpatch,sensors,storagepanel,synoconfbkp","mod…
-
hi,
i have a gateway with the wbrg1 with zs3l module, do you think that is the same procedure?