-
I'm working on a solution for a simple view of the consumed/charged kwh, preferably recorded by car/model (M3 and non tesla), just to get an overview of how much kwh each of the cars consumed in a yea…
-
**Have you looked for this feature in other issues and in the docs?**
yes
**Is your feature request related to a problem? Please describe.**
not related to a problem
**Describe the solut…
-
### The problem
Logger: homeassistant.components.utility_meter.sensor
Source: components/utility_meter/sensor.py:499
integration: Utility Meter (documentation, issues)
First occurred: 9:42:45 am (…
-
I would like to calculate the effective COP considering that the pump in defrost mode steals energy from the house. According to for me, such energy taken from the house should be included in the "min…
-
### Describe your feature request
To be able to add the sensors to the energy dashboard the inverter sensors need to be of device_class: energy. Currently this is power.
For the state_class this s…
-
### Environment
We are trying to run the ros2_roboclaw_driver on a Raspberry Pi 4 B, on a ROS Humble software stack, on Ubuntu Linux 22.04.2 LTS.
The Roboclaw is a 2x7A controller type, and it …
-
Bonjour
Merci pour le travail effectué !! Je rencontre un soucis en créant des utility meter pour suivre la conso de gaz en kwh.
En effet quand je créé un utility meter ("gaz_in_kwh_daily" par exemp…
-
Hi
the croniter version keeps to be overritten by the standard components/utility_meter/manifest.json: "requirements": ["croniter==1.0.6"]
So every boot the system keep to install first version t…
-
The crate represents units, including combined units. It can process "square-meter" and break it down into parts. It can also get the CLDR identifier for the unit. Currently I'm calling it "measure", …
-
I've recently been preparing for my first condition inspection on my aircraft and feel like there is potentially space in MyFlightbook to add a few different things:
1. Airframe / Engine logbooks
…