-
*sergii-s-per:*
System information:
root@OpenWrt:~# ubus call system board
{
"kernel": "4.14.221",
"hostname": "OpenWrt",
"system": "MediaTek MT7621 ver:1 eco:3",
"release": {
"distribut…
-
I'd like to use WMM for a satellite application running on Arduino ecosystem, but this library and WMM_Tinier aren't functions of altitude. Any recommendations for how to modify this library to be a f…
-
Hello,
8189fs, latest master, client won't connect successfully to the AP, it seems to have errors ( older version module works fine, this does not happen on older version of the module, before may…
-
I have modified start.py to bridge eth0 to the NRC7292 wlan0.
in run_ap, I have added the following for the AP-mode pi 4:
```
os.system("sudo brctl addif br0 " + "eth0")
os.system("sud…
-
We need to have a working hostapd.conf which would enable max features and provide stable SSID broadcast and connections somewhere or an example in README.
It took me around 8h last time to have a …
-
I tried everything :/
wpa_suppllicant log:
````
wpa_supplicant v2.5
random: Trying to read entropy from /dev/random
Successfully initialized wpa_supplicant
Initializing interface 'wlan0' conf …
-
Option ifname has gone away and option device replaced it. Luci will fix it and it isn't really broken but just thought I'd mention it. I wouldn't have even noticed if I didn't have some users who use…
-
By accident I hit the install wMM icon, w/o holding L1, and ever since this message pops up after boot and messes up the XMB, at times my controller is mapped to player 2 even.
How do I disable thi…
-
Hi,
Does rpi 3 b+ support 802.11ac 5Ghz in access point mode?
This is my hostapd.conf
```
ssid=ap
wpa_passphrase=password
country_code=GB
# ieee80211d=1
# ieee80211h=1
interface=wlan0
dr…
-
There is a small white line at the top of the screenshots
