-
Hi,
i've exchanged my LDO Leviathan v1.2 Board against the Manta M8p V2.0
Before the Leviathan i've had running a Manta M8p v1.0 and U2c V2.1 and an EBB36 v1.2 via CAN.
Flashing the Manta wit…
-
I cant seem to get multi_pin fans working as the cooling_fan for my bed when doing a MPC calibration. No matter what, the pins are unknown. It works fine for PID calibration. Any feedback would be app…
-
this lib is for master or slaver？
thank you！
craig
-
I had a problem with newer ESP32xx MCUs, as they apparently are not compatible with the included ESP32 code for the internal ESP32xx CAN interface. (Now named "TWAI" by Esperssif.)
Luckily this has a…
red8o updated
9 months ago
-
My XF had headlights on AUTO, when I started the car headlights were on, I've noticed that pi screen dimmed a little. I could control amount of dimming with the usual pot under the steering wheel. Whe…
-
Hello,
Currently the ds402 implementation only supports one motor. We would like to extend this to multiple motors as specified by ds402.
We working with a multi-axis board each using CiA 402. W…
-
The latest version of flashtool.py seems to error out when trying to write to canbus. The error is visible when enabling verbose mode:
```
$ ~/katapult/scripts/flashtool.py -i can0 -u deadbeefbeef…
ressu updated
1 month ago
-
Hi, I am trying to extract a reading for boost pressure from my car. In general, its working - I can connect, read PIDs ok but for some reason the manifold pressure does not seem to match what it shou…
-
Hi,
I'm very happy with the code you've put up, since I'm trying to connect my comfoair-q 450 to my home automation using CAN. I've already figured out some more can messages ( have to double-check be…
-
I am trying to learn about CAN Bus and the NMEA 2000 standard. I have 2 Teensy 4.1 with two SN65HVD230 Transceivers. I am trying to use the Kave Oy simulator to send data to one of the Teensy4.1 then …