-
I have error using the library, when trying to get firmware version.
init: successE (1749) PN532: writecommand I2C write failed: Operation timeout because the bus is busy.
E (3779) PN532: writec…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
ESP32-S3 confirmed not working. I guess due to small RAM.
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x3 (RTC_SW_SYS_RST),boot:0x2a (SPI_FAST_FLASH_BOOT)
Saved PC:0x403cdac2
SPIWP:0xee
W…
-
### The problem
Hello,
board: Lolin ESP32-S3
I'm trying to get the LED (WS2812) on the board to light up. But it doesn't want to compile with that exact pin(gpio 38).
Thanks in advance!
### W…
-
Hello,
I'm using library to access the W25Q64JV chip.
Board used: ESP32-S3 DevKitC-1
Chip Model: ESP32-S3-WROOM-2-N32R8V
Esp32 Arduino Core: v.2.0.9
SDK Vers.: v.4.4.3
As long as I connect *…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
Hello I get the following error imediatly after connecting to wifi:
I (552) wifi:Total power save buffer number: 16
I (552) wifi:Init max length of beacon: 752/752
I (552) wifi:Init max length of…
-
Hi, my Name is Kai and I had an Issue with the 2.8 T-RGB.
I used Platform and I can build the Examples and Update the ESP works. I get also a Success. But the Display has already Stripes after the Up…
-
related: https://github.com/espressif/esptool/issues/809
https://github.com/espressif/esp-idf/issues/10340
### Backgound
Docs: https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/securi…
-
https://github.com/platformio/platform-espressif32/pull/325