-
One of our opsis won't run firmwares newer than `0.0.0-654-gbca243b`, and on that version, we get quite a bit of noise, when two HDMI inputs are connected.
WER is 0.
See attached video (in a ZIP…
-
HI
I'm trying to port your scope to ULX3S board, Goran sent me
your message to fix constraints and toplevel so I did that and
even more
I have prepared toplevel and constraints to build and I…
emard updated
5 years ago
-
### Description of Issue/Question
```
-bash-4.1# salt -l debug -t 3600 vuwunicossj0001.ods.vuw.ac.nz state.sls rsyslog2
[DEBUG ] Reading configuration from /etc/salt/master
[DEBUG ] Using cached …
-
Hello,
I just noticed 2 issues with the udev rule/firmware loading on the QHYIII290:
firstly, the udev rule line is missing from 85-qhy.rules:
```
ATTRS{idVendor}=="1618", ATTRS{idProduct}=="029…
-
Traceback (most recent call last):
File "/bin/iti1480a-capture", line 9, in
load_entry_point('ITI1480A-linux==3.0.1', 'console_scripts', 'iti1480a-capture')()
File "build/bdist.linux-x86_6…
-
_From @CarlFK on March 31, 2015 22:45_
so that v4l2-compliance doesn't error:
$ v4l2-compliance -d /dev/video1
```
fail: v4l2-test-controls.cpp(513): g_ext_ctrls worked even when no controls ar…
-
Hi Christian,
After your suggestion to wait for some time before issuing the ~.points command, I tried waiting for 15 minutes after the BAC0.device() command, but with the same result:
PS, this …
-
```
xenial
sudo add-apt-repository --yes --update ppa:timvideos/fpga-support
sudo apt install hdmi2usb-mode-switch
git clone https://github.com/timvideos/HDMI2USB-firmware-prebuilt.git # 3.4 …
-
_From @shenki on September 3, 2014 5:37_
It appears that the v4l2 uvcvideo device can support PTZ controls, and the kernel has support for this: https://lkml.org/lkml/2014/7/8/837
We should add supp…
-
Hello freeze, sorry to bother you again! = /
I decided to write here because I think it would be my most appropriate to try to solve my problem and if other people have the same problem can see thi…