-
I posted this over at reddit This should be all the secret sauce code we need, save for integrating the pressure altitude function, etc. Its C based code and should be simple to roll into the current …
-
As discussed on Slack and the mailing list, the specification as it stands right now doesn't support all PGNs and sentences we should support in v1. This GH issue is an attempt to collect and list all…
-
Would it make sense to save wifi aps and cell towers without a GPS location or would that support spamming too much?
We could guess a rough location from nearby wifi aps and cell towers that have bee…
-
I've got Stratux v.03b2, and was attempting to use a UBLOX GPS. I'm seeing traffic on /dev/ttyAMA0, and the stratux.log says it is getting GPS data, but neither the Stratux WebUI nor ForeFlight are s…
-
1. Stratux version: v0.8r1 https://github.com/AvSquirrel/stratux/commit/fd936e7e1b71429abb4e853f8a7116078a3da718
2. Stratux config:
SDR
[ ] single
[X] dual
GPS
[X] yes
…
ghost updated
8 years ago
-
Hi,
Nice work on the book and on providing a python implementation.
I recently came across a paper that discussed estimating the measurement noise covariance matrix in an online fashion as follo…
-
The current spec doesn't include a good place for metadata about data sources, such as N2K devices on the network, 0183-enabled devices, other SK devices, DIY devices (e.g. arduinos) etc. At the momen…
-
-
**Problem statement:**
GPS position accuracy is hard coded as NACp = 11 (0xb) in gen_gdl90.makeOwnshipReport() . ForeFlight thererfore reports accuracy as 3m any time a valid ownship GPS position is …
ghost updated
8 years ago
-
Hi, I've a baseline between a VRS from a caster and the NV08C device (raspignss+raspberry with rtklib installed on it). I can get a fix but just for GPS and not for GLONASS. Running obs from the rtkrc…