-
Hi,
I have the following physical connection:
`[
-
Hi,
The project is very nice. I did the same. But the colors are mixed.
Red -> Blue
Green -> Red
Blue -> Green
For example;
A red color image appears blue.
How can I fix?
Thank you.
-
I Have a single 16X32 matrix connected to Raspi 2, using the wiring diagram you detail.
I run "sudo ./rotating-block-generator.py" and this is the result... what could possibly be wrong here? I did…
ghost updated
7 years ago
-
Hello
I use P5 smd 32X32 1/16 scanning.All is ok just for few seconds but after six seconds or more became garbled(disturbed,damaged).Wiring IS OK.please Help Me
https://ufile.io/cb873 (Film)
-
Hi Hzeller,
I am going to build a large Led matrix chain using p2.5mm 64x64 led matrix or p5mm 32x32 led matrix.
Its size is 320x256.
Therefore, when I am going to use 64x64 led panels, I think I…
-
Hello all,
I'm pulling my hair out trying to find the correct settings for my new panel here, so I'm turning to you all for help. First, here is a link to the panel I purchased:
[https://www.arro…
-
Hi Henner,
I found your repo through this [tutorial.](https://learn.adafruit.com/connecting-a-16x32-rgb-led-matrix-panel-to-a-raspberry-pi?view=all)
I purchased all of the materials in the tutori…
-
Hello,
Everything works fine for me except the colors on the bottom half of the display. For some reason, the bottom half's LEDs won't display the color green. I verified this by running the first …
-
hello
please i need help, in the prject you said "The utils directory is meant for ready utilities to show images, animated gifs, text and video. Read the README there for instructions how to compile…
-
Hi i use 32x64 led panel connect 2 parallel by jumper wire. In parallel2 color is wrong at row 1-16 but 17-32 is work.
help me please.
https://goo.gl/photos/57s8pkximVGq3wJn7
https://goo.gl/pho…