-
Action PlatformIO test failed since few days.
Ex: https://github.com/stm32duino/Arduino_Core_STM32/pull/1242/checks?check_run_id=1469456447
```
Error: Traceback (most recent call last):
File…
-
For the Arduino RS485 Shield, on the Getting Started page the 3 DIP switch position functions seem backwards after studying the schematics provided.
Can someone verify this is true?
Thanks.
-
Until recently I was using the ESS with a regular Arduino Uno, where it was working fine, but I've moved to an Arduino MKR 1010 and I'm communicating with the ESS via the I2C expansion pins.
Using …
-
HI,
I did perform the changes to the prinf library but the specic but cannot compile on the specific board.
Have anyone tried using this board?
Thanks
Spyros
-
The issue of tcp retransmission still exist with server when using webclient example, what should i do to solve it?
I am using stm32 blue pill with ENC28J60.
Thanks
-
## Subject of the issue
NEO-M8U module causes bus issues with other I2C devices, causes resets and general instability.
### Your workbench
What development board or microcontroller are you using …
-
Hello,
I used the following code successfully to publish messages from MKR1000 (via MKR ETH) to an internal MQTT broker. On the other side, a nominal Node-RED flow received each message (at the tra…
-
Hello,
Rather than use the example you give with the SD card to increase the program memory size for an application on the MKR1010, are you able to suggest how I might use just the 2MB of flash mem…
-
I have been doing some tests using QoS1 instead of QoS0 and getting boards freeze after 1 msg sent to broker.
I am using Arduino MKR GSM 1400.
1. When using settings QoS0: no issues sending mess…
salvq updated
4 years ago
-
I am running Catalina 10.15.5 on Mac book Pro (16-inch, 2019). The serial port does not show up on Arduino IDE and so I am having serious trouble uploading my code on an Itsybitsy nRF52840 Express …