-
I was caught off guard but thrilled to find the wokwi pushbutton object
* models bouncing
* OR NOT!
by attribute.
Could we get something like
{ "bounce": "0" } // perfect non-bouncing …
-
**Issue by [00alis](https://github.com/00alis)**
_Friday Oct 24, 2014 at 08:29 GMT_
_Originally opened as https://github.com/arduino/forum2/issues/83_
---
It seems like there is an issue in saving …
-
Hi everyone.
I have a LilyGO SIM7600, it works fine the first time, but it stops connecting to the network when I reconnect power supply. I use 5V with 2A.
1. **Connect power supply:** The board…
-
I wish I could provide a more defined question, but I hit my limits here :)
I'm trying to play with a popular flashlight firmware which is avr based.
The sources, and a good automated build on ubu…
-
Hi Guys,
Having issues installing this core on ArduinoIDE 1.8.19 via board Manager.
Get the following errors: ( see below )
I have manually navigated to the github pages mentioned, and the files s…
-
We should set up CI that would run test suites on hardware or at least in a simulated environment. Any help to that end would be welcome.
-
Hi,
I'm mid-build of a project (an escape room game), which initially consisted of around 8 Arduino Nanos, which communicated beautifully using PJON's SoftwareBitBang strategy (and I must commend y…
-
At the moment, I have been reverse engineering a firmware hex file that targets the Atxmega256.
Ghidra performs quite well for the most part, but the lack of specific support for the ATXMEGA256 vs.…
-
### Describe the request
New Dell Win 11 Home installation did not get drivers from my recent IDE 2.0.1 installation.
Simply installing IDE 1.8.19 gave me the drivers for v2.0.1. Easy.
However…
-
Mike Brandon
Mon 26 Jun 2017 08:13:10 PM UTC
Programmer hardware: linuxgpio
Device type: m2650
I have two different .hex files (unfortunately I am unable to share entire .hex files as I do not own t…