-
Hi @orgua
I have been able to work the example of the DS18b20 in a SAMD21 with the following modifications
https://github.com/orgua/OneWireHub/pull/59
but I get the following error when trying…
-
Sur les 2 moteurs 1 seul fonctionne
Lorsque je raccorde le moteur 1 au driver 1 et …
-
Using a Teensy 3.2, I can compile and upload the sketch fine.
It goes through the startup animation on the LEDs.
I can select a mode with the button.
It even remembers the mode when I restart.
I…
-
The device is working except reading SD card. It can detect when a card is inserted or removed but can't read it (it displays an sd card picture with a cross).
To check wiring I installed Circuitpyth…
-
The app is constantly refreshing and reindexing, to the point of being unusable. Open up the app, indexes, open settings, and don't change anything, indexes. Click the home button (house), indexes. Cl…
-
via whatsapp +96176653802
-
Nice work on this project! This looks perfect. I really like the way you've used the rotary encoder as the only interface.
I would really like use one of these to replace the Sleep As Android app. …
-
How to use tycmd in windows ?
How can I configure the module as you stated in https://github.com/ashtuchkin/vive-diy-position-sensor/blob/docs/docs/manual.md ?
Can the arduino serial port be abl…
-
- Need to add arduino into schematic stand-a-lone
- Include ESP-01
- include programming interfaces for both devices via ftdi
-
There seems to be some kind of issue with the code not properly running with the current debouncing method. in order to get the heater to heat i need to hold both buttons while it's heating, letting g…