-
## Environment
- Development Kit: ESP32-DevKitC
- Kit version (for WroverKit/PicoKit/DevKitC): v2
- Module or chip used: ESP32-WROOM-32
- IDF version: v3.1.2 release
- Build System: …
-
### Board
ESP32-WROOM-32D
### Device Description
FTDI IC and voltage regulator to USB
### Hardware Configuration
None
### Version
v2.0.6
### IDE Name
Arduino IDE (tried both…
-
## Issue template
- Hardware description: Olimex STM32-E407
- RTOS: Zephyr
- Installation type: -
- Version or commit hash: -
#### Steps to reproduce the issue
Set up MicroROS like in the Tu…
-
Hi Phillip,
I recently got hold of some AVR128DB28. Though they are pretty new, Spence Konde already supports them with [DxCore](https://github.com/SpenceKonde/DxCore). They belong to the `megaavr`…
-
Hello,
i am running a server on STM32F767 nucleo using FreeRTOS and LwIP and every thing is ok.
i add 2 users according to the example for the server_access_control:
https://github.com/open6254…
ghost updated
3 years ago
-
- Development Kit: none
- Module or chip used: ESP32-WROOM-32
- IDF version: v4.2-dev-1206-g741960d5c
- Build System: idf.py
- Compiler version: xtensa-esp32-elf-gcc (crosstool-NG esp-20…
-
rt-thread内核使能了smart,网络使能LwIP,均测试没问题。在online packages里边使能umqtt,然后选择编译示例程序(umqtt_ex_start等)。最后使用未经修改的qemu.sh脚本启动rt-thread。
在msh中键入umqtt_ex_start后rtt成功连接到后端mosquitto(mosquitto经测试配置没问题,freertos的coremqt…
-
Hi, I'm trying to create a simple project with the u8g2 library, an ST7920 LCD and the ESP32 using eclipse and the ESP-IDF but I can't get the LCD to show anything.
I've created a simple project usin…
-
I am trying to pair a Heltec Wireless Stick (V3) to a Polar H10 Heart Rate Monitor and get a crash when calling `getServices()`. This happens on the example `BLEScan` and `BLEClient` examples without…
leegs updated
6 months ago
-
Hi.
I have slightly understood the purposes of task processing of Arduino.
I wonder ESP32-BLE-Mouse works well without xTaskCreate().
Does skipping(bypassing) this xTaskCreate() invites some troubl…