-
When starting a print, the hotend is instructed to heat up to certain temp (which happens) but Hotend target temp is still off, both in graph as in setting table. The hotend graph also reflects the be…
-
Not totally sure, but it seems the autoconnect function leads to an error if the printer is connected already.
If I print something and connect to the printer before (otherwise one can not send a pr…
-
Hello,
the MM10 module is recognized, but there are no date from the modul.
devices
These device IDs are on the EMS Bus: 0x08 0x09 0x10 0x21
and 4 were recognized by EMS-ESP as:
MC10 Module …
-
Hi, Klaus! This is a very useful project. I am glad I found it and hope to use it in my home.
Unfortunately I have this issue:
- After loading firmware (1.00) I was able to enter device web interf…
-
First of all - amazing project the ebusd. It's somehow difficult to get started as beginner but finally I got everything to work :-) Great Wiki helps here.
One of the last things I'm struggling wit…
-
Hello :) First of all, thank you for this very useful project, it fills a real need!
I'm using it on my home charging station for three primary purposes: for monitoring, to be able to dynamically adj…
-
Library blocks and library questions include a lot of unused list_names and other sheet details if they were imported from a large Excel library file. This causes annoying delays to view or edit these…
tinok updated
4 years ago
-
I've just set up your plugin and everything showed up nicely. Now monitoring it a bit and while everything is turned off the logs says a different story.
Is this normal? Piekarnik (which is Cookin…
-
[Config.zip](https://github.com/MarlinFirmware/Marlin/files/3685896/Config.zip)
At the time of writing, the latest version of Marlin 2 - bagfix is installed.
After executing the G29 command, the…
-
Home Assistant 0.107.7 Wiser R2.1
Been getting several of these each day lately, so added wiser debug logging and noticed that hub updates seem to happen every 30 seconds now. Did this not used t…
Fulch updated
4 years ago