-
Hi there,
struggling (again) with the tunneling mode. It works for windows, but not for linux. I get an IOException telling me that the given argument is invalid. This happens on first UDP datagra …
-
Problem description
--------------------
Under Windows you get the following error when connecting to KNX/IP device:
```bash
2017-09-17 18:35:45 ERROR (MainThread) [homeassistant.setup] Error …
-
(etckeeper is installed to protect against accidental deletion of files. (Check if period needs to be increased))
A real backup-to-external strategy is needed as SD cards are known to crash at some p…
-
Hi,
I have problem with configure and started daemona KNXD.
Used model with this page:
https://michlstechblog.info/blog/raspberry-pi-eibknx-ip-gateway-and-router-with-knxd/#comment-2119
After inst…
-
@sjka @kaikreuzer DefaultMasterProfile does not support items configuration like for example:
`DateTime Time "Time [%1$tT]" { channel="ntp:ntp:myhometown:dateTime", channel="knx:generic:ip1:1_1_12:…
-
Hi
How can I change the binding address of the service running at port 9010?
I had OLA running together with OpenHab. But now I virtualized OpenHab and I have problems getting the OpenDMX USB to t…
-
hi,
I'm trying to use this on rapsberry pi with a berkel usb/knx adapter
when I try to use this command:
`knxtool groupswrite ip:localhost 1/3/15 1`
it turns on the light, if I use immedi…
-
@TinusK reported that the gateway scanner does not work with eibPort3 ( http://bab-tec.de/index.php/eibport_v3_de.html ).
-
int parity can be one of these:
#define UART_PARITY_5N1 0x00
#define UART_PARITY_6N1 0x02
#define UART_PARITY_7N1 0x04
#define UART_PARITY_8N1 0x06
#define UART_PARITY_5N2 0x08
#define UART_PARI…
-
## Current Behavior
GA 3/5/0 available to read.
Autorefresh every 5 second produce warning timeout but KNX Device have send the response and OH recieved value
`Number WarmFl…