-
Hello. Good morning. I installed Klipper this time. And I created Gcode with Simplify 3D.
After uploading to Octoprint and heating is complete, the printout is not printed.
English is not my fir…
-
Hi, i get the "Move exceeds maximum extrusion" Error mid Print after 1 hour.
Log file attached. Slicer used: Simplify3D 4.1.1
Printed many files fine before.
Terminal output while that occou…
-
**The problem**
1. Printing a set of hinges, created in Tinkercad
2. Saved as an STL file, then created a .gcode file in Cura. Everything looks fine in the Cura preview, with the entire hinge on the…
-
### Did you test the latest `bugfix-2.0.x` code?
No, but I will test it now!
### Bug Description
I recently started testing out 2.0.9.1. I am finding the when homing the Y axis, halfway to the home…
-
Hi Antoine,
I am impressed by your excellent work which is very helpful to my research!
I would like to know if you have extracted the joint-space feature (512d) for all clips in Howto100M that …
-
Alright searched through the issues and couldn't find a solution to this problem.
Machine is a corexy running two MCUs one LPC1768 ASZMS Mini (runs all axes) and a AVR ATMEGA2560 MKS Gen L (runs ex…
-
Hi there,
I have a gMax 1.5 at work that i recently decided to upgrade to the latest BugFix, i'm getting a random Heating Failed Error always on the second layer.
The printer is configured as du…
-
While running experiments for a paper recently I was in a position to directly compare LLVM 3.8 vs 6 CUDA codegen performance. I saw a performance regression of about 25-33% in two out of three apps, …
-
As a delta printer user, I'd very much like to have the option to express the position_endstop as a formula in e.g. `position_endstop: common_z_height + endstop_offset`, where the common_z_height woul…
-
Stratos 1.2.2
I have an item whose max dimensions (X/Y) are a bit less than the size of the build table, but the **footprint is much smaller than the table**. I.e. the object widens as the Z gets b…
S3D-r updated
2 years ago