-
The most annoying thing about your distribution = which is otherwise wonderful - is the need to have to wait for it to graciously generate the graphics. This is a pain... reboot the machine?? Wait wai…
-
Hi
I am getting
**Unable to write tmc spi 'stepper_x' register GLOBALSCALER**
error when I try to home steppers on SKR 3 EZ, using EZ5160 drivers
below is my printer.cfg config, pretty standard…
-
On the main page "how to calculate CoP, it is stated in the formula to use Leaving Water *before* BUH R1T (as that is a common sensor across Daikin models it would seem)
![image](https://github.com/r…
-
I have a Wemos D1 Mini with ESPEasy Release mega-20191208 and 2 MAX31855 Thermocouples connected (GPIO13 & GPIO2) I want to read both temperature values (Wifi BBQ Thermometer).
There is a strange i…
-
Hello All
I downloaded the firmware from branch anycubic-kad-bugfix-2.0.x and applied the following changes to fit my needs:
**configuration.h**
#define GRID_MAX_POINTS_X 3
#define NEOPIXE…
-
CARP now resumes sampling when the app restarts as part of the brand new release 0.40.0. This is a great (and much needed) feature as operating systems become more aggressive in killing apps that cons…
-
Hi,
I am using your code with STM32F411 (disco board) and some chinese probe based on DS18B20.
I am using CubeIDE but I've modified a few places in code to let is find all definitions and I've got t…
-
We need a way to change the base address of those sensors that can change (HDC2010) and/or disable sensors when their I2C address conflicts with off-board sensors. It would just be too frustrating for…
-
### Description
On Auto-Home (and also via moving menu) the Z-Axis does not move back down anymore without the Z-EndStop.
With the EndStop switch plugged in it does move down.
### Steps to re…
-
Upon running `sudo ./install.sh`
this is the output :
```
> Copying source to /usr/src/cm4io-fan-0.2.0...Done
> Running DKMS install...
> Error! The /var/lib/dkms/cm4io-fan/0.2.0/6.1.21-v8+…