-
During Setup it would be very helpfull to auto-detect if a LCD screen is connected to the RaspiBlitz or not .. for example see: #860
Maybe a python script can test thru the GPIO library to check if…
-
This task is initiated by mentioning isolated Ethernet in #4. It does not require immediate attention, but should be of interest when we exceed BB3's three modules limit (better sooner, then later :).…
-
A module to interface to an LCD display, for example:
[Ender LCD Display](https://www.ebay.com/i/254599064474)
It needs 3 input pins for the rotary encoder and its associated pushbutton, 2 outpu…
-
Hi all! Very new to this so please bear with me as I have ZERO idea what's going on. I bought a ender 3 and replaced all the things with a skr mini e3 v3, tft35 e3 v3.0, followed all the instructions …
-
I have used drawRGBBitmap on a neopixel display in the past and I wanted to reuse the same logic on an SSD1351 128x128 display. I am using the drawRGBBitmap because I would like to display a full scre…
-
hi how are you?
actually i am trying to connect tft 35 or mini 12864 v1 to the boart btt e3 rrf- through reprap and no luck((( https://teamgloomy.github.io/Configurator/Start using this one!)
cou…
-
So i have a just bought an RRF board and im trying to use the Ender 3 v2 screen ( DWIN ) with it, already changed all the parameter on marlin that are necessary to use the DWIN display, and also rewir…
-
### Bug Description
Example configs for bugfix-2.1.x all contain the following in Configuration.h
```
/**
* Add Z offset (M424 Z) that applies to all moves at the planner level.
* Thi…
-
This is essentially uploading a file from the editor to the display from an SD card on the Arduino.
This should also be able to work from anything that can provide buffered data (e.g. network, blueto…
-
- Arduino board: Feather M4 Express
- Arduino IDE version: 1.8.12
(using PlatformIO with Atmel SAM 6.0.1, Adafruit GFX Library 1.10.7 & Adafruit Zero DMA Library 1.0.8)
I'm using an Adafruit …