-
Hey Guys,
had the sensor working for a few days and had python write values to mysql but now the device has thrown errors, if i remove the power and bring the sensor back up and run the example cod…
-
In the example BME280Compensated.ino, it first does the ```readAlgorithmResults``` and then the ```setEnvironmentalData```. Are you sure that's the correct order? Shouldn't we first compensate/set and…
-
V1.0.0，华为honor8
备注：app成功添加Snow
-
https://github.com/adafruit/Adafruit_CircuitPython_SGP30/commit/ed1db09ff8b6ac2625a9bace2fe9ce5aca034846#commitcomment-25187627
-
如题。
-
For example, TVOC maxes out at 1,000 µg/m³.
https://github.com/KhaosT/HAP-NodeJS/issues/141
-
### Hardware:
Board: ESP32 Dev Module wroom
IDE name: Arduino IDE?
Flash Frequency: 40Mh
PSRAM enabled: no
Upload Speed: 1…
-
Hi,
Is it possible to use an ESP32 to scan and gather raw advertising data?
At this moment i use a raspberry pi with HCIDUMP -Rx to get the following data;
> 0000: 04 3e 2b 02 01 00 00 84 34 4…
-
@J-N-K I have BMS-THS-211 from Elab.
If I discover them it get BMS sensors at inbox. I didn't add them.
If I configure them manually I get `UNINITIALIZED - HANDLER_CONFIGURATION_PENDING`
If I confi…
-
What is the unit of measure for warm_up?
What is the unit of measure for voc?
What is the unit of measure for co2?