-
I installed gqrx by pybombs,like this:
> pybombs -p bladeRF install bladeRF gr-iqbal gr-osmosdr gqrx
after the installation is complete, start gqrx and report an error:
```bash
lsh@ubuntu:~$ gqr…
-
Successfully have GNU Radio 3.9 installed and followed the instructions in this repo to compile the gr blocks for bladerf.
However, I get this error that I cannot import `bladeRF` when I hit F6 on …
-
Hi All,
I'm running SDR Angel 6.18.0 on Windows 10 64 bit, with an RTL-SDR.COM v3 USB adaptor. This adaptor is stable on the other SDR software I use.
The issue I'm seeing is frequent crashes wh…
-
On macos 11.0.1 there is no audio with last version of gqrx
versione 2.11.5 work well
2.14.2 and 2.14.3 don't work
tested with rtl-sdr and hackrf
-
## Issue Description ##
Hello,
I have been trying to run the 5G COTS EU application note. But none of the terminals that I have tested connect to the 5G network
There is no error or warning m…
-
Compiled from master branch this morning and I'm noticing a large amount of CPU usage even when sdrpp isn't connected to an SDR (eg, on first startup). CPU is a `Intel(R) Core(TM) i5-6500T CPU @ 2.50G…
-
Hello,
I downloaded and compiled today SDRPlus v1.0.4 without problems.
When I started it, this appeared:
sdrpp
[2021-08-28 09:26:25.110] [info] SDR++ v1.0.4
[2021-08-28 09:26:25.110] [info…
-
Hi,
I'm just monitoring 20MHz on Windows 10 with both GRC v3.7.13.4 and Pothos v2019.01.26 (I'm already seeing Os in the console of Pothos at such a low sampling rate in mono channel).
On GRC t…
-
## Issue Description ##
Srsue can't access eNB when UE HW is bladeRFX40.
On the other hand, it can access when UE HW is bladeRF2.0microxA4.
Both uses the same ue.conf. I only exchange UE HW …
ghost updated
2 years ago
-
Hi all. I'm trying to do a GPS receiver with bladeRF x40. I have installed GNSS-SDR and GNU-Radio using PyBOMBS, so I need to build the Osmosdr_Signal_Source implementation for the bladeRF x40. To do …