-
Hi there,
I just hope thats the right place to ask.
Currently I'm trying to get a boot-console working with fbtft and fbcon.
Compiling fbtft as a module, loading it after boot and playing with fbv …
-
write_reg() was meant to superseed write_cmd() and write_data().
After write_reg() was added, the _flexfb_ driver came, and it didn't know beforehand the number of data values. Thus write_cmd/data sta…
notro updated
10 years ago
-
I have a problem with the Watterott MI0283QT-9A.
Hardware:
MI0283QT Adapter (inkl. LCD) Rev 1.2
RPi-Shield-Bridge (Raspberry Pi - Arduino Adapter) Rev 1.1
This is how i installed the display: http:…
ps915 updated
10 years ago
-
Hi,
We would love to include the fbtft driver in the standard raspberry pi linux kernel (raspberrypi/linux) but have a policy of trying to avoid pulling in out of tree drivers.
Do you have any plan…
-
Trying to build this on an archlinux distro but I'm a linux noob. Any chance you'll adapt or post instructions to accomplish this? Thanks.
-
As the subject says I have an HY28B device working perfectly apart from the fact that the display is mirrored vertically (so everything is written upside down and the most recent console lines are at …
-
I'm trying to connect a ebay clone of the Adafruit 2.2 display to a Beaglebone black (it's working fine on the Raspberry PI). I have looked at the DTS file and can't figure out what pin to use for SPI…
-
Hi,
I posted instruction on getting and ili9341 based screen working.
Please link it in your wiki if you find it useful.
Here is the link:
http://marcosgildavid.blogspot.com/2014/02/getting-ili9341-s…
-
I'm playing with fb_watterott.c and works fine, congratulation for your great work!
Do you know how can I add touch screen support?
thank you
-
I have tried building the kernel from source. I have tried using a preconfigured image and I have tried a standard image updated with rpi-update. I have not had success with any.
I am able to modpro…
jfs10 updated
10 years ago