-
_Original author: daniele...@gmail.com (May 16, 2013 18:34:58)_
What steps will reproduce the problem?
1. flashing a new nightly Cyanogenmod rom
2.
3.
What is the expected output? What do you see in…
-
```
How to NAND flash rootfs.jffs2 file system?
Is there any procedure to NAND flash for android?
What are the new partitions and offsets of NAND partition?
What are the load addresses that i have …
-
Ok, so I applied the patch to the correct u-boot repositry tag, modified some configuration parameters to force u-boot get into fastboot mode, and built for sun6i hardware successfully.
The result of …
-
```
How to NAND flash rootfs.jffs2 file system?
Is there any procedure to NAND flash for android?
What are the new partitions and offsets of NAND partition?
What are the load addresses that i have …
-
```
Hi, May I know if the firmware
"openwrt-ar71xx-generic-tl-mr3040-v2-squashfs-factory.bin " is compatible with
the TL-M3040 V2.2?
Thank you.
```
Original issue reported on code.google.com by `z…
-
```
Hi, May I know if the firmware
"openwrt-ar71xx-generic-tl-mr3040-v2-squashfs-factory.bin " is compatible with
the TL-M3040 V2.2?
Thank you.
```
Original issue reported on code.google.com by `z…
-
```
How to NAND flash rootfs.jffs2 file system?
Is there any procedure to NAND flash for android?
What are the new partitions and offsets of NAND partition?
What are the load addresses that i have …
-
Hi!
Maybe I am doing this wrong. But running BusinessOps.exe doesn't do anything. I have also tried to "Run as Administrator" which flashing a window up quickly and then disappears. Is it because I…
-
after the device is flashed and the reset button is pressed the HID USB and serial monitor are very slow to start
-
This would allow ESC's to be flashed without a need for a flight controller as suggested by @AlkaMotors
One could simply use a FTDI adapter or arduino or anything similar.