-
When Telemetry is turned on, the Air quality values are getting cut off at the bottom of the screen. I think reducing the header size will give enough room for this to show on smaller screens like on …
-
### Category
Other
### Hardware
Heltec V3
### Firmware Version
2.3.2.63df972
### Description
I am trying to have an heltec consume messages from MQTT.
* I changed the root to msh/US/rob/snd
*…
-
I'm able to compile using this library, but when I try to add an additional library that is required for my project: https://github.com/GreenPonik/DFRobot_ESP_PH_WITH_ADC_BY_GREENPONIK, I get the foll…
-
would it be possible to have the igate/digi function available on the tracker(both sw with the possibility to swich from tracker to iGate)? Heltec and TTGO
use case: I have the tracker in the car,…
-
### The problem
Following the example within the ESPHome.io page `https://next.esphome.io/components/display/waveshare_epaper.html`
I've paired up a Waveshare ePaper 2.92 board version 2.1 to a Wemo…
-
think I found a bug in the WebCLi .. for a Heltec V3, config, power, ADC will not let me enter anything but whole numbers. The Android app will..
-
### Category
Other
### Hardware
Heltec V3
### Firmware Version
2.3.2.63df972 Beta (Stable)
### Description
Heltec v3.1
Meshtastic firmware 2.3.2.63df972 Beta (Stable)
iOS app 2.…
clwgh updated
6 months ago
-
I just installed on my Heltec LoRa 32 Wifi V3
Everything seems to be functioning except for the LoRa radio.... I'm not sure if its my device, or something with the software.
I'm seeing the followi…
-
915 freq,
Packet queued
96386060: EV_TXCOMPLETE (includes waiting for RX windows)
Packet queued
96829613: EV_TXCOMPLETE (includes waiting for RX windows)
Packet queued
97273165: EV_TXCOMPLE…
-
I'm using a Heltec Stick Lite ESP32-S3 LoRa module and I can set and check all of the settings apart from the INDOOR/OUTDOOR setting. I need to use the HSPI class as the LoRa module uses the SPI class…