-
I'm trying to run the install.sh on a Rpi4 4GB
…
-
I'm interested in implementing a Pi HAT, a la https://www.raspberrypi.org/blog/introducing-raspberry-pi-hats/
Ideally this would interface with the classic 8-relay DB-25 internal to the legacy Encore…
-
@gkasprow I've just pushed the final changes to second revision of the project. It's ready for review and hopefully prototype manufacturing.
Additionally I designed a breakout board which would be he…
-
Hi,
The platform is Raspberry Pi 4B with Raspberry Pi OS Lite (Bullseye).
Here is the system configuration:
pygame 2.1.2 (SDL 2.0.14, Python 3.9.2)
Pygame 2 was installed this way:
sudo apt i…
-
Here's what i'm getting when trying to install `tflite-runtime-nightly` on Python 3.9.2:
```
pip install tflite-runtime-nightly
Looking in indexes: https://pypi.org/simple, https://www.piwheels.o…
-
Hi I was wondering what happens when / if the Raspberry Pi should halt due to over heating of the CPU, will the pi juice try to restart the Pi because of the watchdog or does the pi juice know that th…
-
GPIO18 should be PCM CLK, not PWM0. GPIO12 is already PWM0.
-
https://github.com/stianeikeland/go-rpio/blob/f6236e58667c16a237d2916b379b4337460b555b/rpio.go#L245
I try to use python with gpio in other pins (not only in above pins).
Why limit pins in the c…
-
Dear community,
I try to get and set values but I am unable to identify the correct adresses.
Requesting the type via telnet gives me : 204B. (Request via 00F8 / Protocol = P300)
After having d…
-
Hi,
I am using an fresh installed RPi4B with your PiJuice and get the following failures in dmesg:
[17565.248606] i2c-bcm2835 fe804000.i2c: i2c transfer timed out
[17570.368665] i2c-bcm2835 fe804…