-
Stratos 1.2.2
I have an item whose max dimensions (X/Y) are a bit less than the size of the build table, but the **footprint is much smaller than the table**. I.e. the object widens as the Z gets b…
S3D-r updated
2 years ago
-
I'm installing a dual extrusion system with shared nozzle. However I can't change the tool properly.
The first tool change is completed successfully, however, the next tool changes does not behave l…
-
Hi Kevin,
I left an ocarina printing last night. I set my max Z at 140mm on Klipper, and the final shut off move on the gcode is to lift Z by 10mm and turn off heaters.
What ended up happening i…
-
When I select PRE HEAT ABS my printer starts preheating the bed and the nozzle at the same time. The nozzle of course reaches the end rempetarute muuuch faster and it has to wait frequenty 5 to 10 min…
-
Your printer's firmware reported an error. Due to that OctoPrint will disconnect. Reported error: Move exceeds maximum extrusion (1.671mm^2 vs 0.640mm^2)
[octoprint.log](https://github.com/KevinOCo…
-
In Cura, if you clicked _Help - Report a Bug_, you were sent to the Cura Issues site in Github. But in Stratos, you will be sent to BCN3D homepage, printer issues page. I guess it's not supposed to be…
S3D-r updated
2 years ago
-
Recently I printed a model which resembled a 4 legged table. Obviously, I had to print it upside down.
The table top printed first and nicely, but when it started printing legs, it faced with two i…
-
Hello,
is it possible to display thumbnails from the Slicer Ideamaker? That would be a nice feature for me, because I switched to Ideamaker from S3D and Prusaslicer. As I understand only Prusaslice…
modmt updated
2 years ago
-
I've had several failed prints recently because of this issue. I have a dual extruder printer, one of the extruders (the one giving the problem) is a fairly long bowden which requires a pressure advan…
-
Where can I download the pre training model of s3d-g model based on Imagenet and dynamics-400 dataset? Or can you upload it to this repository?
请问哪里可以下载到基于ImageNet和Kinetics-400数据集的S3D-G模型的预训练模型?或者请问作…