-
Hi,
since two releases I miss the 1M flash size file to use with my SONOFF devices.
The Web flasher has them listed, but fails with a 404 error.
can that files maybe be included again?
thanks …
-
### What happened?
I initially set up Zigbee2MQTT using a Zigbee Dongle-E.
I successfully added a smart plug, and it was functioning correctly, including both control and status reporting.
I then u…
-
Hello,
Many devices (like Shelly 1PM or SonOff Pow R2) are using the HLW8012 sensor to monitor the power consumption.
Would it be possible to integrate the HLW8012 library (https://www.arduinolib…
-
I installed this 2 days ago and initially it was working fine but have noticed that the temp/humidity on the sonoff web page was not the same and not updating the accessory in the HomeKit App. I would…
jat80 updated
7 years ago
-
### What happened?
I have zigbee2mqtt 1.39.0 running in a Docker container.
It is connected to a Ethernet-based Zigbee coordinator device ([UZG-01](https://uzg.zig-star.com/product/)).
I had to…
-
After [accepting the alpha version of the code](https://github.com/Koenkk/zigbee-herdsman/pull/317), now I propose to write comments here until we complete the development.
The adapter is designed …
-
**What new integration would you wish to have?**
MCP39F501, the energy monitoring chip present on the Shelly 2 (https://shelly.cloud/shelly2/)
Datasheet: https://www.microchip.com/wwwproducts/en…
-
### What happened?
It's not possible to set the alarm state and sensor values are not available (see screenshot):
![Z2M Bosch](https://github.com/Koenkk/zigbee2mqtt/assets/10740088/b70d1eba-7cc4-4…
-
![image](https://github.com/dauheeIRL/SonoffSimpleLAN/assets/66782941/e929f0f6-dac3-4a1d-a5d0-77cb3723f190)
Hi there. Please advise how to get around error 400 - note that I am using API key and …
-
**delete this template text while filling your issue/request but before that please check if:**
- do you have the latest version of the code in use? (this is a very common problem & fix that everyone…