-
### Link
https://www.philips-hue.com/en-us/p/hue-white-filament-a19---e26-smart-bulb/046677571108#overview
### Database entry
{"id":11,"type":"Router","ieeeAddr":"0x001788010ce947cc","nwkAddr":2120…
-
I think MQTT is the key to this. I set up my own broker, fudged DNS so my shower thought it was aqualisa and I got a lot of traffic (> 1 message per second) from the shower. At this point nothing is…
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
Sonoff ZBPro with ESP32 random crash when enter to main menu page.
### REQUESTED INFORMATION
_Make sure your…
-
### Describe the issue you are experiencing
added or tweaked.
Running an Home Assistant Blue, 2024.1.3 with Skyconnect, 2.4.2 Sillicon lab firmware, looks like it started when upgrading to 2.4.4 (…
-
Hi, couple of my powered devices (Livolo zigbee switches) keep falling out of the network, I need to permit join manually once a day to fix it. Takes a few seconds but it’s annoying. The devices a…
iznaf updated
11 months ago
-
### The problem
I have 4 Aqara Roller shutter devices, only _1_ of these are recognized correctly by ZHA even thou they are bought at the same time.
The ones not working are not responding to open…
MTrab updated
9 months ago
-
**Context**
ZBMini-L is Zigbee 3.0 switch which does not need neutral line for power. It seems to work fine at the beginning but after minutes ZBMini-L switch is paired it shows a delayed response …
-
There is a problem when I build the esp-zigbee-sdk\examples\esp_zigbee_HA_sample\HA_on_off_light
error: implicit declaration of function 'esp_zb_device_add_set_attr_value_cb' [-Werror=implicit-func…
-
I'm updating my own on/off endpoints with `esp_zb_zcl_set_attribute_val()` in response to GPIOs but this doesn't work reliably or after the first ~15 endpoints.
Example project: https://github.com/…
nomis updated
11 months ago
-
### Link
https://www.ikea.com/se/sv/p/tradfri-led-ljuskaella-e27-806-lumen-smart-tradloes-dimbar-varmvit-klot-60541496/
### Database entry
iam not sure where to get this?
### Comments
Hello
So…