-
Hi all.
I am using bladeRF x40 and GNSS-SDR to obtain a GPS position. However, when I run the configuration file, problem with the biastee apperas, What can I do to solve it?
> Initializing GNSS…
-
Hello,
I'm following this GNURadio [tutorial](https://wiki.gnuradio.org/index.php/Guided_Tutorial_Hardware_Considerations) for making a spectrum analyzer. I'm using osmosdr block to use my bladerf …
-
### Steps to reproduce
1 Connect HackRF to PC
2. Start gqrx (with the hackrf selected/set to default)
3. Click Start DSP processing.
4. (optional) Transmit to a local HAM repeater RX frequency (1…
-
Hi
Sorry for bothering you but I had no such a problem when I installed v 1.0.3.
Now, on 1.0.4 when I run cmake .. I get this error:
pi@raspberrypi:~/SDRPlusPlus-1.0.4/build $ cmake ..
-- Chec…
-
I have removed all of the SoapySDR modules and installed only what is listed in the notes on here **libsoapysdr-dev**
[2021-11-18 17:28:55.188] [info] SDR++ v1.0.4
[2021-11-18 17:28:55.188] [info…
-
## Issue Description ##
https://github.com/gnuradio/pybombs/issues/525
On armv7l the neon instructions should be forced to have the fpu set to neon. Add the -mfpu=neon line below to the…
-
## Issue Description ##
For v21.04, there are some HW combinations where the UE cannot detect the cell.
My Experiment result is bellow;
version = srsRAN_21_04
OK:(eNB,UE)=(bladeRFxA4, US…
ghost updated
2 years ago
-
Hi! I'm a newbee at SDR theme and I tried to run your dumper on Ubuntu 18.04, but i've failed. It were not any software requirements listed and I decided to fix all "on the run". First I got an error …
-
Hi
Frustrated after so many weeks!! of trying to get OP25 running.
Fresh install of Ubuntu 16,18,20
Tried running BladeRF and RTL and both detect, but crash RX.ry
Why is there not a simple…
-
## Issue Description ##
There are no description in ue.conf about Correspondence between "tx_gain" in ue.conf and "set gain" in bladeRF.
In case of bladeRFxA4, the range of tx gain is [-23.75 …
ghost updated
2 years ago