-
weather.py example only displays half the screen. This is using a fresh install on RPi OS Buster. Tested installing by both pip3 and manual clone of repo then running install.sh.
![image](https://u…
-
## Description
### Full log
```
.0 (/home/weiying-chen/rust/rust-esp32-hx711)
error: linking with `ldproxy` failed: exit status: 1
|
= note: LC_ALL="C" PATH="/home/weiying-chen/.rustup/t…
-
### Board
featheresp32-s2
### Device Description
Adafruit ESP32-S2 Feather with BME280 Sensor
[https://www.adafruit.com/product/5303](https://www.adafruit.com/product/5303)
platformio.ini as fo…
-
### Category
Hardware Compatibility
### Hardware
Other
### Firmware Version
2.3.10.d19607b
### Description
I can't compile for target Heltec Wireless Stick V3. Other ESP32 devices…
-
### The problem
As soon my devices reached ~99d10h uptime:
* they can't go over - continue reporting same uptime for an hours;
* they start to work strange - stop reporting measurements, stop react…
-
I'm trying to read an SGP41 module from an ESP32 dev board (ESP32-WROOM-32D).
![image](https://github.com/Sensirion/arduino-i2c-sgp41/assets/88904228/b417b5c1-261c-4ae9-bbca-60e26b8243a9)
The ex…
-
Hi,
I'm trying to install a package to a raspberry pi pico. I get the following error (seems independent of the package):
```
install --progress-bar off micropython-ssd1306
PROBLEM IN THONNY'S B…
-
With this code (to read the weather with esp32-c3 and bm280):
```
use esp_idf_svc::hal::{
delay,
i2c::{I2cConfig, I2cDriver},
peripherals::Peripherals,
prelude::*,
};
use b…
-
![image](https://github.com/joshua-jerred/Giraffe/assets/19292194/a4f28d59-554a-4427-b16a-ffeab2e41c5a)
![image](https://github.com/joshua-jerred/Giraffe/assets/19292194/44db9206-8ff0-447c-91fd-988c4…
-
```
Compiling library "ESPAsyncWebServer-master"
/home/bitscoper/.arduino15/packages/esp32/tools/xtensa-esp32-elf-gcc/esp-12.2.0_20230208/bin/xtensa-esp32-elf-g++ -MMD -c @/home/bitscoper/.arduino15…