-
Since it's possible to have 2 router at home, one master and other repeating signal, but instead of 192.168.1.xxx it could be 192.168.31.xxx.
How could be possible to detect one shelly device connect…
-
It would be nice to have something to help discover remote address.
Things I've tried so far:
* `hcitool lescan` gives tons of `(unknown)` addresses, I even tried ~20 of them after filtering out …
-
Hi all,
Just to let you know that I bought a new Echo 4th gen(the round speaker bowl) te place my first gen. I couldnt discover any new devices after delete the old ones. In the meanwhile upgrade t…
-
Bonjour
Actuellement dans les mode on a "Off" "Manuel" et "Auto (prog)"
 I get after 7-8 hours Out Of Memory error and screen become black. When i press CTRL + R to reload or restart MagicMirror then is OK again with 7-8…
-
I would like te see if:
1. The Inverter is Off or On
2. In case of a 3 fase-inverter the different AC-Voltage per fase
3. In case of a 3 fase-inverter the different AC-Current per fase
4. The A…
-
Hi,
I'm running Octoprint on a mini PC so I can't use temperatures sensor connected to gpio. On the other hand I have near printer esp8266 sending room temperature to domoticz home automation and I c…
-
I have a Nimly touch pro door lock, supported by zigbee2MQTT as Onesti Products AS easyCodeTouch_v1.
zigbee2MQTT is publishing a couple of sensors, a switch for auto lock on/off and locking on/off.
…
-
### chart Name
Domoticz
### Operating System
TrueNAS SCALE 24.04.0
### Deployment Method
TrueNAS SCALE charts
### Chart Version
11.0.5
### Kubernetes Events
```Shell
Events:
Type Reason…
-
my ip is 192.168.1.100 port is 8080
the connection ends badly'm trying to understand the problem