-
Hi,
We are trying to flash the pico with an esp32s3 and a sd card.
The esp32 setup can copy the uf2 to a usb flash drive and the destination file matches the original.
When the pico is plugge…
-
-
- Hardware description: ESP32-S3
- RTOS: FreeRTOS
- Installation type: micro_ros_setup
- Version or commit hash: humble
#### Steps to reproduce the issue
1. Setup ESP-IDF environment variab…
-
### Port, board and/or hardware
esp32 port
### MicroPython version
1.23.0
### Reproduction
Compile for the ESP32-S3 without a board variant. flash to the ESP32-S3-FN8 series MCU (no PSR…
-
**Describe the bug**
When trying to upload a file, the upload prompt will open and it also starts uploading. The problem is, that the window won't close, and the communication with the device is also…
-
Has anyone been able to get the touch pins to work? I have tried many ways including just reading all of them and touching them one at a time. None of them register. On my other esp32s3 modules they "…
-
Just as issue "Request OTA example compatibility for ESP32-C3 (CA-196) #99" I'd like to request a similar patch to the c3-compatibility.txt but for the ESP32 S3.
I've confirmed that this patch work…
-
Hello,
thanks for this nice project, i'm trying to bring it to run :-)
rzeldent Rene 's nice esp32cam-rtsp and maxgerhardt 's pio-esp32cam have some more esp32cam versions supported
by looking…
-
Reporting this on ESP32-S3 since that was what I had tested, but this likely applies to all ESP32-* Xtensa and RISC-V cores.
OpenOCD v0.12.0 added Zephyr OS awareness and also supports the ESP32-S3…
-
Hi there, I have uploaded my sketch with deep sleep after showing a text and now I can't upload anything else as right after it displays image it goes into deep sleep and disappear from list of device…