-
Dear @robogeek,
Thank you for sharing this repository with the world. May I ask if it is actively used and under development on your side? Is support for OpenADR 3.0.1 planned for this repository, …
-
Hi,
In your video: https://www.youtube.com/watch?v=oENNNfy5GSM you mention CSUM adds up all the nibbles, and add 2.
Mux's / Your code adds up only the nibbles from the first 7 bytes by the look of…
-
Feature:
Allow Peaq to run without a specific charger.
In this case Peaq outputs the allowed current to a sensor value instead of controlling the charger.
This should be chosen in the configuration…
-
When using dynamic energy prices, the electricity price can become negative. This is done to help prevent unbalance on the grid, by "promoting" energy use during these periods of overproduction from g…
-
In a few short weeks, we are going to try to pull together a demo for CharIN, to be held in Cleveland from June 11-14. Given that we have been working on smart charging recently, the goal is to try an…
-
> Als optional mögliche Anzeige in Solectrus wäre es toll, wenn auch der Ladestand des E-Autos mit angezeigt wird.
https://github.com/orgs/solectrus/discussions/2865#discussioncomment-8651945
-
The smart mode limits the charging current if the mains setting is exceeded. As of beginning of 2023, the Belgian energy price will depend on the peak usage.
Is it possible to limit the charging curr…
-
MediaMTX version 1.0.3 added a check for valid SPS/PPS of RTSP SDPs (https://github.com/bluenviron/gortsplib/pull/394). This broke a webcam RTSP stream that had been working in version 1.0.1 and earli…
-
Hi,
I was wondering if someone out here could perhaps help me out with my Sungrow inverter experiment. I have a SH10.0RT hybrid inverter with a Sungrow battery of 12.8kWh and I want to permanently …
hacor updated
5 months ago
-
### Describe the bug
Hallo,
nach Update von 0.130.7 auf 0.130.8 Fehler am Charger EvBox Elvi.
Ein anderer User hat das gleiche Problem #15984
Ein downgrade auf 0.130.7 behebt das Problem.
Dan…