-
I said it before but again: Awesome Job and thanks for sharing the library with us!
## [Summary]
Using SX1262, Arduino Pro Nano if a second device that uses SPI added to the sketch, even after th…
-
I am using T-beam v1.0 to receive data. Using the basic example, we received a LoRa packet, but after a certain period of time we did not receive the data (Sender keeps sending data). So I've modified…
-
Hey all,
I have different devices:
- ESP32S
- ESP32
I have tried to use them with the library, by connecting Dragino LoRa shields in the following manner:
```
ESP32S(Pin) Dragino
SCK(1…
-
Hi all,
I have two ESP32s, one I transmit on and one I receive on. I set different Sync Words on the transmitter and receiver to hopefully stop them communicating with each other, but they are stil…
ZebNZ updated
4 years ago
-
Hey GIPdA!
I've recently been working on porting your `v2` branch to run on a raspberry pi for my own use. I was wondering, is this something you'd be interested in having in your project?
You c…
-
Hello! The same problem like closed issues on ESP32 (basic example for esp32).
I made sure the transmitter was working. Data from HackRF:
![image](https://user-images.githubusercontent.com/6287944/7…
-
Hello,
Is a CRC always sent with each transmission when using the test_loragw_hal_tx application?
Using a signal generator, I can send LoRa modulated packets, and the receiver (sx1250) can recei…
-
Hi ,
I have 433M dragino lora shield with rf98 chip And I also use arduino mega. I used lora sender and lora receiver in both sides and both gave me the same problem Starting LoRa failed. My cod…
-
Hi,
I am starting to use LoRa.h right now, and I enabling CRC in the transmitter in the setup function. But how should I check it on the Receiver?
thanks in advance!
-
i use arduino uno and i use external power supply for RFM96.
at first when i buy, simply test it using transmitter and receiver example, it work like charm.
now after one month again same hardware s…