-
Hey @Mhttx2016 thanks for your work.
I wanted to know which dataset have you trained your object detector and tracker on?
If you have used the EPFL 4 person dataset for training the tracker model, …
-
### Description of the bug
By switching the infill type the final weight of the model changes a lot. This is not caused by the infill connections and anchoring. It happens even in big inner volumes…
-
We should maybe switch to one single counter for both, calibration and visualization. Otherwise it might lead to weird bugs. See attached log, where the calibration is at step 1758 and the visualizer …
-
Hi, because depth computation doesn't work without the GPU, and I'd like to try my own stereo algorithm on images, I was wondering if it would be possible to get corrected/undistorted images using thi…
-
### Prerequisites
* [x] Bosch BTH-RA
* [x] Output from Home Assistant Developer Tools state e.g.
* [x] Output from Home Assistant Device Diagnostic from BT
```yaml
hvac_modes: heat, off
min_…
-
Very new to this library...just need a quick answer if GPTQ is going to be supported.
Need to inference LLaMA2-13b-GPTQ on RTX 4060 ti
-
QooCam EGO camera stores photos in parallel format within DNG files. It would be helpful to try auto-detecting stereoscopic format of these photos, although it seems that they lack information in any …
-
ERROR load cal data for input 'data' error
2023-03-01 18:20:43,877 ERROR Could not find a backend to open `/open_explorer/ddk/samples/ai_toolchain/horizon_model_convert_sample/04_detection/09_yolov…
-
### Description
Add support for M579 gcode which allows setting of XYZ scaling factors during start to fine tune dimensional accuracy. Specifically to make it easier on Deltabot owners(like myself)…
-
We have found that adjusting the virtual nozzle size can change the accuracy of a model borders. For example, if you have a 0.4mm physical nozzle and specify 0.35mm in Cura, then it will overshoot in…