-
The new spool holder can apparently break rather easily, so people may need to print replacements.
Can you please provide the exact Slic3r settings for the `Spool-holder.stl`, e.g., print settings,…
-
### Version
Slic3r-master.2018.04.13.1651.df993c5.64bit
### Operating system type + version
Windows 10
### Behavior
In some cases the infill (specifically the inner support of top layers) ove…
-
As explained in the headline.
This would bring lot of possibilities (eg. I need)
Thx
_Use `About->About PrusaSlicer` for release versions_
_For -dev versions, use `git describe --tag` or get…
-
### Version
2.3.1
### Operating system type + version
Ubuntu 20.04.2 LTS
OpenGL installation
GL version: 4.6 (Compatibility Profile) Mesa 21.0.1
Vendor: AMD
Renderer: Radeon RX 580 Series (…
-
### Version
2.2.7
### Operating system type + version
Mac OS 10.14.5
_In case of 3D rendering issues, please attach the content of menu Help -> System Info dialog_
Returns nothing.
…
-
### Version
Tried with 2.2.0alpha2 and 2.2.0alpha4
### Operating system type + version
Ubuntu linux 18.04
### 3D printer brand / version + firmware version (if known)
MK3S, but I haven't prin…
-
All the icons along the top bar (add, delete etc) are blurry and seem out of focus,
### Version
_Version of PrusaSlicer used goes here_
_Use `About->About PrusaSlicer` for release versions_
…
-
There are quite a lot Issues open which are discussion to how to change the start g-code in order to prevent oozing during mesh bed leveling.
It boils down to, that the nozzle has to be at a differ…
-
```
What steps will reproduce the problem?
1. download and run RepG 0037 Mac installer
2. load part and click Generate GCode
3. drop down box containing slicing profiles ONLY contains one profile for …
-
### Version
2.1.0+ (and older Slic3r)
### Operating system type + version
MacOS 10.14.6 on 5K display
### 3D printer brand / version + firmware version (if known)
Prusa i3 Mk3
### Behavior…