-
Hello,
Could you help me to report FlowerMate Moisture sensor as an humidity sensor in Domoticz. This is better because it can be exported and recognized by HomeKit.
Currently it is reported as …
lboue updated
5 years ago
-
Hi,
thanks for your great work.
i love your sensors.
Anyhow i think that there is a bug with the python implementation installed via pip and also in this repo.
1. The register numbers found in /ut…
-
I'm using a standard ESP12 running Tasmota that's battery powered and the sleep is not sleeping. I have it set too 100 the battery will only last around 1 or 2 days. I'm using a 9v battery but soon go…
-
To write what @teixeirak and I spoke about:
The following traits have NEON measurements at the different tower heights (10,20,30,40,50m)
- wind speed and direction (2D)
- single aspirated air tem…
-
I've added a 3-pin interface for connecting to external analog or digital sensors. Usage is pretty simple, but I'd like to provide at least a couple sketches to demonstrate how it could be used.
Se…
-
Not 100% sure this is a blinka issue, but starting here. Something about blinka's I2C w/ Seesaw? No issue on a Metro w/ CP.
Re this thread:
https://forums.adafruit.com/viewtopic.php?f=19&t=146478
…
-
'ascii' codec can't decode byte 0xe1 in position 24: ordinal not in range(128)
-
Hello
i try to send a struct of 3 floats and one int over nrf with the library.
Problem:
SendStruct.bodentemp=analogRead(A2);
and then sending the struct. i will either receive an 0 or an other…
-
I consider Belchertown almost complete at least for my needs. I would like to mention some ideas to make it perfect but at the same time I don't want to abuse of Pat's generosity.
- Add Heat and Cold…
-
Dears, I had envisaged putting a tiny ESP8266 module outside in the sprinkler box, they are dirt cheap and have built-in wi-fi and webserver. They can control relays with their digital outputs and the…
pubdc updated
5 years ago